NOTE:SETTINGS ARE MADE THROUGH SUPPLIED POWERCHUTE SOFTWARE OR OPTIONAL SMART SLOT ACCESSORY CARDS

FUNCTION

FACTORY

DEFAULT

USER SELECTABLE CHOICES

DESCRIPTION

Automatic Self-Test

Every 14 days

(336 hours)

Every 7 days

(168 hours),

On Startup Only,No Self-Test

This function sets the interval at which the UPSwill execute a self-test.

UPS ID

UPS_IDEN

Up to eight characters to define the UPS

Usc this field to uniquely identify the UPS,(ie.server name or location) for network management purposes.

Date of last Battery replacement

Manufacture date

Date of Battery Replacement mm/dd/yy

Reset this date when you replace the batterry module.

Minimum Capacity Before Return from Shutdown

0 percent

15,30,45,50,60,75,90 percent

The UPS will change its batteries to the specified percentage before return fron a shutdown.

Voltage Sensitivity

The UPS detects and reacts to line voltage distortions by transferring to battery operation to protect the connected equipment. Where power quality is poor,the UPS may frequently transfer to battery operation.If the connected equipment can operate normally under such conditions,reduce the sensitivity setting to conserve battery capacity and service life.

High

Medium

low

Brightly lit:UPS is set to high sensitivity(default).

Dimly lit:UPS is set to medium sensitivity.

Off:Low battery warning interval is about eight minutes.

To change the UPS sensitivity,press the voltage sensitivity button(rear pane).Use a pointed object(such as a pen) to do so.

You can change the sensitivity level through PowerChute software.

Alarm Control

Enable

Mute,Disable

User can mute an ongoing alarm or disable all existing alarms permanently.

Shutdown Delay

90 seconds

0,180,270,360,450,540,630 seconds

Sets the interval between the time when the UPS receives a shutdown command and actual shutdown.

Low Battery Warning.

PowerChute interface software provides automatic,unattended shutdown when approximately two minutes(by default) of battery operated run time remains.

2 min.

5 min.

8 min.

Brightly lit:Low battery warning interval is about two minutes.

Dimly lit:Low battery warning interval is about five minutes.

OFF:Low battery warning interval is about eight minutes.

Psossible interval settings:2,5,8,11,14,17,20,23 minutes.

The low battery warning beeps are continuous when two minutes of run time remain.

To change the warning inerval default setting,press the voltage sensitivity button(use a pointed object such as a pen to do so),while pressing and holding the Test button(front panel).

Synchronized Turn-on Delay

0 seconds

60,120,180,240300,360,420 seconds

The UPS will wait the specified time after the return of utility power before turn-on(to avoid branch circuit overload).

High Transfer Point

230V models:253VAC

120V models:127VAC

100V models:`108VAC

230V models:

257,261,265VAC

120V models:

130,133,136VAC

100V models:

110,112,114VAC

To avoid unneccessary battery usage,set the high transfer point highter if the utility voltage is chronically high and the connected equipment is known to work under this condition.

Low Transfer Point

230V models:

208VAC

120V models:

106VAC

100V models:

92VAC

230Vmodels:

196,200,204VAC

120V models:

97,100,103VAC

100V models:

86,88,90VAC

Set the low transfer point lower if the utility voltage is chronia\cally low and the connected equipment can tolerate this condition.

Output Voltage

230V models:

230VAC

230V models:

220,240VAC

230V models ONLY,allow the user to select the output voltage.